簡體中文
EnglishSpecialized production: Auto lamp mould, Automotive Parts Moulds, Commodity Mould, Rubber Mould
Tech Blog
Add: 26#,GuangShun Road, North industrial Zone, Huangyan, Taizhou, ZheJiang, China
P.C:318020
Tel:+86-576-84082662 / 81100878
Fax:+86-576-84082662
Sprue Bushings
Post Time：2014-11-13
Sprue bushings connect the nozzle of the injection molding machine to the runner system of the mold. Ideally, the sprue should be as short as possible to minimize material usage and cycle time. To ensure clean separation of the sprue and the bushing, the bushing should have a smooth, tapered internal finish that has been polished in the direction of draw (draw polished.) Also, the use of a positive sprue puller is recommended. The Three Common Sprue Pullers illustration shows three common sprue puller designs.
Three Common Sprue Pullers
Tech Reference
Sprue bushings connect the nozzle of the injection molding machine to the runner system of the mold. Ideally, the sprue should be as short as possible to minimize material usage and cycle time. To ensure clean separation of the sprue and the bushing, the bushing should have a smooth, tapered internal finish that has been polished in the direction of draw (draw polished.) Also, the use of a positive sprue puller is recommended. The Three Common Sprue Pullers illustration shows three common sprue puller designs.
Three Common Sprue Pullers